30bar-40bar High Pressure Piston Air Compressor

Delivery term:The date of payment from buyers deliver within days
  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Jiangsu

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-28 03:13

  • Browse the number:

    331

Send an inquiries
+
Jiangsu Faygo Uion Machinery Co.,Ltd
Contactaixin:

Contactaixin:

feige(Mr.)  

Email:

telephone:

phone:

Area:

Jiangsu

Address:

Flying Road, Korea Industry Zone, Phoenix Town, Zhangjiagang City, Jiangsu Province, China

Website:

http://www.faygocn.com/ http://feige.chinaqdmyi.com/

+

30bar-40bar High Pressure Piston Air Compressor

Medium and High pressure piston compressor

The quality of our products can keep up with international standard as introduction of foreign technology.

High efficiency,high performance engergy saving,reliability and long lift are the principle characteristics of HENGDA high pressure air compressor.

The Free air delivery from 0.15m3/min to 6.0m3/min.HENGDA makes a very wide model of rang of compressor to meet a wide rand of industrial application and requirement , especially for PET BLOWING Industry. Every machine is equipped with starting,unloading solenoid valve,auto condensate drain valve and advanced capacity control to make machine to operate safe and stable.


Feature:

1. Light alloy piston effectively reduces weight and reduces mechanical power consumption。

2.Cast iron cylinder heads, and independent seat enhance the life of the equipment.

3. Equipped with the king of air valve "Herbiger" automatic efficient valve they make the equipment big capacity, more action, high efficiency, long life service.

4. Special design flywheel, V belt drive reduce the operating noise

5. Removable outdoor air intake silencing filter and 10 micron filtration precision effectively improve the quality of the air intake and reduce the inlet temperature.

6.Rotating components adopt two SKF rolling bearings, which ensure the stable operation and greatly reduce the wear and tear of the bearing.

7, cast iron structure: The air cylinder and the crank case use 100% cast iron material, guarantees the unit the service life.

8, air cylinder: The deep wing piece type, the independent casting air cylinder may 360 degrees eliminations produce compressed air quantity of heat. Between

the air cylinder and the crank case with the bold fastening, is advantageous for the routine maintenance and the maintenance.

9, flywheel: The flywheel leaf blade produces one kind “the tornado” the type air current to cool the deep wing piece type air cylinder, the middle chiller and the after cooler.

10, intercooler: The finned tube, the immediate packing blows in the flywheel gas place.

11, after cooler: The finned tube, the forced-air cooling type, install equally with the middle chiller in the flywheel gas blow place. Compressed air which discharges after the after cooler compared to ambient temperature high approximately about 20℃

12, offcenter unloading gear: Release from cold and in air cylinder's air, prevents the unit overload start.

13, adjusting device: All high-pressured unit disposes the automatic start/engine off control, moreover may choose the constant speed control and the dual controls.

14, self-refrigeration draindown system: The self-refrigeration wash water valve installs on the exhaust separator/valve's support, when the compressor engine off or unloads when the constant speed control mode, discharges the condensed water automatically.

15, electrical machinery: TEFC, the IP54 electrical machinery, conforms to the IEC standard.

16, actuation: The entire seal shroud “V” the belt transmission, the movement is steady.

17, foundation: On the Chungking Steel Works structure's foundation opens has the groove, the electrical machinery may move, is advantageous for the fastening “V” the leather belt.


Technical parameters(Basical model for reference)

Model Air capacity Working pressure Power(Kw) Speed(r.p.m) Weight(Kg)
(M3/min) (Bar)
VH-0.7/30 0.7 30BAR 7.5 680 1800*630*1140 410
WH-1.0/30 1 11 600 2005*795*1260 530
WH-1.2/30 1.2 15 760 2005*795*1260 550
WH-1.5/30 1.5 18.5 790 1140*735*1450 520
WH-2.0/30 2 22 670 1150*860*1600 610
WH-2.35/30 2.35 25 760 1150*860*1600 620
2-WH-3.0/30 3 2*18.5 790 1880*1180*1140 1150
3-WH-3.6/30 3.6 3*15 700 2350*1570*1880 1580
VH-0.17/35 0.17 35BAR 2.2 560 1050*470*540 110
VH-0.65/35 0.65 9 605 1800*630*1140 420
WH-1.1/35 1.1 15 900 1420*830*840 475
WH-2.0/35 2 22 570 1150*860*1600 615
WH-2.2/35 2.2 25 735 1150*860*1600 600
VH-0.3/40 0.3 40BAR 5.5 500 1350*625*770 290
WH-1.0/40 1 11 790 140*840*840 470
49SH-2.6/40 2.6 25 625 2020*935*1100 900
49SH-3.0/40 3 30 695 2020*935*1100 920
2-49SH6.0/40 6 2*30 695 2160*1270*2400 2100
4-WH-4.0/40 4 4*11 790 2020*1570*2000 2400
6-WH-6.0/40 6 6*11 790 3495*1565*2000 3600

Having been focused on plastic machine producing for over 10 years, FAYGOPLAST is now well-known as one of the leading and professional manufacturers and suppliers of 30bar-40bar high pressure piston air compressor. You can rest assured to buy quality, stable and durable machine at competitive price with our factory.